Phoenix Display · Application engineering
Energy & metering displays
Meters and energy equipment run for many years, often outdoors and on tight power budgets. Choose a display format that shows the required readings clearly, then confirm temperature, power and lifecycle requirements.
Interface use cases
- Utility and sub-meters
- Energy-management controllers
- Charging and power equipment
Before you select a module
- Readout format
- Lay out the required digits, units and status icons at the recorded format and character size.
- Power and temperature
- Budget display and backlight power, and confirm the operating temperature range for the installation.
- Long service life
- Agree on lifecycle planning and change control for long-running programs.
Working on a energy & metering product?
Tell an engineer what the product does and where it's used. You don't need a finished spec.
Ask an engineerModule candidates to evaluate
Selected for their recorded format, optics or interface—not certified suitability for this application. Open the original specifications and confirm environmental, electrical and qualification requirements with engineering.
3 candidates
Monochrome
8 x 1 Character Display LCD
Recorded 8 x 1 LCD Display, R,TF,TM. A candidate to evaluate; confirm suitability for this application with engineering.
- Format
- 8 x 1 LCD Display
- Display Type
- R,TF,TM
Monochrome
C-080105C-VB
Recorded 8 x 1 LCD Display, R,TF,TM. A candidate to evaluate; confirm suitability for this application with engineering.
- Format
- 8 x 1 LCD Display
- Display Type
- R,TF,TM
Monochrome
C-080202G-VA
Recorded 8 x 2 LCD Display, R,TF,TM. A candidate to evaluate; confirm suitability for this application with engineering.
- Format
- 8 x 2 LCD Display
- Display Type
- R,TF,TM